Build Info Mini Quads

Discussion in 'Multirotors' started by Manyc, May 26, 2014.

By Manyc on May 26, 2014 at 1:03 PM
  1. Manyc

    Manyc Well-Known Member

    Joined:
    Mar 14, 2014
    Messages:
    1,619
    Likes Received:
    1,189
    Mini Quads seem to be all the rage... small nimble, can carry full FPV gear, and cheap to crash... since I have a disco pro and am scared of breaking it, since the main frames are very expensive.. I thought I would give one of these a shot...

    electronics are in... just need to frame and camera now...

    2014-05-22 17.20.30.jpg
     

Comments

Discussion in 'Multirotors' started by Manyc, May 26, 2014.

    1. 5Fidy

      5Fidy RIP Jason

      Joined:
      Mar 15, 2014
      Messages:
      949
      Likes Received:
      844
      Cool man looks good what is It?
       
    2. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      it will be a bok230RE racing min-quad.. lot of people are using sunnysky motors and dodgy flashed HK esc's... but being in this hobby I have learnt.. buy cheap by twice... hence the T-motors

      the frame is done by a guy in NZ, who's doing a masters in design, and his theasis is quads... heard some good things about them... the frame is G10, not CF, armes are replaceable... and its only $60usd...

      not power distribution board... will have to work something out...
       
    3. The Dude

      The Dude Well-Known Member

      Joined:
      Mar 4, 2014
      Messages:
      1,070
      Likes Received:
      650
      Whats the cost of the whole thing going to be ... I'd like to try one, but dont have a spare 2 k lying around..
       
    4. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      I have the googles and that, so I dont have that cost... the motors esc Fc and all in the pic cost $450, $60USD frame, $45 camera, +vtx

      so about $600... but I have also gone your high end stuff.. if you wanted to go cheaper... you can go some $10 Hk ESC and firmware flash them with blheli and go sunnysky motors.. which would take $150 off the cost...
       
    5. Ben

      Ben Member

      Joined:
      Mar 21, 2014
      Messages:
      71
      Likes Received:
      72
      Looks good mate, I'm finding myself watching the Blackout videos more and more these days. I reckon a little mini would be great fun.
       
    6. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      I was looking at the qav 250.. but hearing good things about the frame... also separate arms... I don't want to replace a frame because of an arm

      Citizen#024
       
    7. Ben

      Ben Member

      Joined:
      Mar 21, 2014
      Messages:
      71
      Likes Received:
      72
      What flight controller are you going to use?
       
    8. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      Cc3d... open pilot...

      Citizen#024
       
    9. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      Ok been a while but here are some basic pics...

      [​IMG][​IMG][​IMG][​IMG]

      As you can imagine it's pretty tight getting it all in... there was a total of 6 mm of height for escs I ended up putting 2mm spacers in to give me some extra room..

      The kit came with Phillips head screws... I swapped them out... connect all the esc to one 4 mm bullet connectors...

      I did a test hover in my garage at 1am Thursday... was stable enough... but thought it was a bit gittery...

      Anyway started cleaning up wires when I noticed a few screws I had not tightened pretty much at all... explains the gitters... would have been causing huge vibrations....

      I'll put up some pics when I have it all together without the fpv gear as I want to fly it a bit first and make her fly hire I like before adding the gear... that said fpv gear has been wired up and tested.. Using the 5v power from the vtx and using a step up to make it 12v for the camera..



      Citizen#024
       
    10. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      Ok... test fpv flight completed... light was pretty poor and it was windy but it flew well... for those familiar with the MRCHC field I even split the trees with it...

      Will see how it goes with better light but overall I'm happy.[​IMG][​IMG]

      Citizen#024
       
    11. smakmeharder

      smakmeharder Administrator

      Joined:
      Mar 3, 2014
      Messages:
      4,825
      Likes Received:
      3,096
      Being the first person to witness its flight, I must say that I am impressed. It flew very well. The video was also amazing...
       
    12. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      Ok... this thing is awesome... with the CC3D in what they call rattitude mode, its a bomb... basically it self levels of the sticks are near mid stick and switch to rate mode after a certain throw... Since I was working from home today, thought I would get in a quick FPV... and by the second flight I am flying between trees and along a path behind me... slowly I admit... but man it was fun.... and since its so light and cheap props... I'm not to concerned about damage...
       
    13. smakmeharder

      smakmeharder Administrator

      Joined:
      Mar 3, 2014
      Messages:
      4,825
      Likes Received:
      3,096
      So all up that thing cost 600... plus you would need some fatshark goggles and receiver I imagine?
       
    14. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      The goggles are the killer... as I said you could go hk esc and flash them with blheli - $50
      Sunny sky motors - $100
      Cc3d board - $110
      Props - $16
      Rx - $70
      Vtx $50
      Couple of packs.. $50
      Fpv camera - $50
      Frame $100. Or go hk for like $20
      Decent antenna $75 optional

      Fatsharks -$500

      You can go a monitor but it's not the same...

      Total excluding goggles

      Yep about $600..

      Tho I spent $300 on motor and esc not $150

      Plus I already had the rx, vtx, goggles and packs

      If you get one that takes only a board cam I have one spare...

      Citizen#024
       
    15. 5Fidy

      5Fidy RIP Jason

      Joined:
      Mar 15, 2014
      Messages:
      949
      Likes Received:
      844
      Hobby king sell goggles for $280
       
    16. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      True... but you'll need to buy the vrx module for the goggles and a battery as they don't come with then

      Citizen#024
       
    17. Manyc

      Manyc Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,619
      Likes Received:
      1,189
      Ok.. here is pretty much the first flight FPV with the bad boy...

       
    18. The Dude

      The Dude Well-Known Member

      Joined:
      Mar 4, 2014
      Messages:
      1,070
      Likes Received:
      650
      nice dude, i like it..
       
    19. 3dmick

      3dmick Well-Known Member

      Joined:
      Mar 14, 2014
      Messages:
      1,050
      Likes Received:
      983
      That's cool mate I was waiting for the crash in the trees
      That was so funny lol
       

Share This Page

test

    About Us

    Just like you, Heligods staff are regular everyday fliers. Join our forum and participate in what will become the worlds greatest rc helicopter forum..

    Credits:

    A big thank you to the following people who helped us put together this site:

    Pope Francis

    Deli Lama

    George Bush

    Gene Simmons (aka Crash)