I have decided to sell this great little heli. It has served me well. Both are near new as I bought 1 new kit and and rebuilt 90% of my second one with new parts too. ONLY FRAMES AND PARTS AS IN PICS AND MENTIONED BELOW.

$395 + POST for all below

Mini Protos 1: Fresh rebuild mostly new parts
Stretch kit
Alloy upgrades
Stock 6S motor
MSH plastic tails

Mini Protos 2: Was a fresh build from new kit bought recently, but used main block, swashplate, and frames for Mini protos 1. But it is a complete frame.
Non-stretch
No alloy upgrades
Cheap 325mm main blades
Low rider head block but i think needs new spindle.
BUT I have a spare standard headblock included, and another new in packet too!!

Canopies:
1 x stock new
1 x fusuno new
1 x stock used 2-3 times
1 x fusuno used and abused but works fine and is one I use.

EXTRAS:
Align DS 520 tail servo
Turnigy 55amp esc

SPARES:
These are just the bits that are new in packet and sealed. There is more new but loose and also a few bags of mixed bits. The value of what i havent included in parts list is probably $50+ or more.

RETAIL VALUE - $341.86
Battery and esc oring set msh 4100
Main shaft hollow msh 41004 x 1.5
Main shaft locking ring msh 41005
Tail shaft msh 41006
Ball m2x4,8 msh 41009
Pinion 16T msh 41016
Servo rod set msh 41023
Tail control rod set msh 41024
Tail boom brace msh 41026
uniball link L msh 41030
Tail pitch assembly msh 41032
Tail guide pulley msh 41033
Guide pulleys msh 41034
Belt msh 41035
Tail box msh 41044
Tail rotor msh 41046
Tail blade holders msh 41047
Canopy mounting post msh 41055
Thrust BB 4x8x3.5 msh 41065
BB 3x6.5x2.5 msh 41069 x 2
BB 4x9x4 msh 41072 x 2
BB 3x6x2.5 msh 41075
Servo frames msh 41082
Tail box msh 41086
FBL long stand uniball msh 41094 x 2
FBL swashplate ball msh 41095
Head dampers fbl msh 41097 X 2
Control washout arm fbl msh 41098
CF frame plates msh 41092
Horizantal clamp msh 41100
Tail rod stretch msh 41108
Long motor shaft mini msh 41115
Gorilla tail blades msh 51305

This will not disappoint. Feel free to ask any questions. Inspections welcome too.
Thanks for looking